APRILIA RSV MILLE - REGULAR SERVICE User Manual

56
use and maintenance RSV mille - RSV mille R
2%'5,!23%26)#%).4%26!,3#(!24
OPERATIONS TO BE CARRIED OUT BY THE APRILIA Official Dealer (WHICH CAN BE CARRIED OUT EVEN BY THE USER)
(*) = In case of use on racetracks, change every 3750 km (2343 mi).
Component
After running-in
[1000 km (625 mi)]
Every 7500 km
(4687 mi) or 8 months
Every 15000 km
(9375 mi) or 16 months
Spark plugs CS (*)
Air filter CS
Engine oil filter S S (*)
Engine oil filter (on oil tank) P P
Light operation/direction C
Fork C
Light system C C
Safety switches C C
Clutch fluid C
Brake fluid C
Coolant C
Engine oil S S (*)
Tyres C every 1000 km (625 mi): C
Tyre pressure R every 15 days: C
Engine idling rpm R R
Engine oil pressure warning light LED at every start: C
Drive chain tension and lubrication every 1000 km (625 mi): C
Brake pad wear before every trip and every 7500 km (4687 mi): C
C = check and clean, adjust, lubricate or change, if necessary; P = clean; S = change; R = adjust.
Perform the maintenance operations with doubled frequency if the vehicle is used in rainy or dusty areas, on uneven surfaces
or on racetracks.
ING-02.FM Page 56 Thursday, December 16, 1999 2:23 PM

APRILIA RSV MILLE - REGULAR SERVICE Specifications

General

Brand	APRILIA
Model	RSV MILLE - REGULAR SERVICE
Category	Motorcycle
Language	English

Summary

CHECKING THE ENGINE OIL LEVEL AND TOPPING UP

CHANGING THE ENGINE OIL AND THE OIL FILTER

ENGINE OIL FILTER SERVICE

CHANGING THE ENGINE OIL FILTER

Procedure for replacing the engine oil filter element.

AIR CLEANER MAINTENANCE

CHANGING THE AIR CLEANER

Instructions for replacing the air filter element.

FRONT WHEEL REMOVAL AND INSTALLATION

FRONT WHEEL DISASSEMBLY

Step-by-step guide for removing the front wheel.

FRONT WHEEL REASSEMBLY

REAR WHEEL REMOVAL AND INSTALLATION

REAR WHEEL DISASSEMBLY

Step-by-step guide for removing the rear wheel.

REAR WHEEL REASSEMBLY

DRIVE CHAIN MAINTENANCE

CHECKING THE DRIVE CHAIN SLACK

Procedure to verify the correct tension and slack of the drive chain.

ADJUSTING THE DRIVE CHAIN

Steps for adjusting the drive chain tension.

CHECKING DRIVE CHAIN WEAR

DRIVE CHAIN CLEANING AND LUBRICATION

RIDER SADDLE AND FUEL TANK REMOVAL

LIFTING THE FUEL TANK

Procedure for safely lifting the fuel tank for access.

SUSPENSION SYSTEM INSPECTION AND ADJUSTMENT

FRONT SUSPENSION OVERVIEW

Description of the front suspension components and function.

ADJUSTING THE FRONT FORK

Guide to adjusting front fork settings for ride quality.

FRONT FORK ADJUSTMENT SETTINGS (RSV MODEL)

FRONT FORK ADJUSTMENT SETTINGS (RSV R/OPT MODELS)

STEERING DAMPER ADJUSTMENT

REAR SUSPENSION SYSTEM

ADJUSTING THE REAR SHOCK ABSORBER (RSV MODEL)

Steps to adjust the rear shock absorber settings for the RSV model.

REAR SHOCK ABSORBER ADJUSTMENT (RSV R/OPT MODELS)

BRAKE PAD WEAR CHECK

ENGINE IDLING AND CONTROL ADJUSTMENTS

IDLING ADJUSTMENT

Procedure for adjusting engine idle speed.

ACCELERATOR CONTROL ADJUSTMENT

SIDE STAND AND SAFETY SWITCH CHECK

SPARK PLUG MAINTENANCE

BATTERY TERMINAL MAINTENANCE

CHECKING AND CLEANING THE TERMINALS

FUSE INSPECTION AND REPLACEMENT

LIGHTING SYSTEM ADJUSTMENT AND MAINTENANCE

ADJUSTING THE VERTICAL HEADLIGHT BEAM

VEHICLE CLEANING PROCEDURES

VEHICLE STORAGE AND RETRIEVAL

LONG PERIODS OF INACTIVITY

AFTER A PERIOD OF INACTIVITY

TECHNICAL SPECIFICATIONS

TYRE SPECIFICATIONS AND PRESSURES (RSV)

TYRE SPECIFICATIONS AND PRESSURES (RSV R)

ELECTRICAL SYSTEM COMPONENTS

ELECTRIC SYSTEM DETAILS

LUBRICANT AND FLUID RECOMMENDATIONS

WIRING DIAGRAM (RSV MODEL)

WIRING DIAGRAM KEY (RSV MODEL)

WIRING DIAGRAM (ASD MODEL)

WIRING DIAGRAM KEY (ASD MODEL)