Need help?Do you have a question about the APRILIA RSV MILLE R TUONO - 2002 and is the answer not in the manual?
General| Brand | APRILIA |
|---|---|
| Model | RSV MILLE R TUONO - 2002 |
| Category | Motorcycle |
| Language | English |
Rules regarding carbon monoxide, gasoline, hot components, and used engine oil.
General safety rules for operating the vehicle.
Emergency procedure for a stuck throttle and warning against using a faulty throttle.
Identification and function of controls on the left handlebar.
Identification and function of controls on the right handlebar.
Identification of warning lights, gauges, and displays on the instrument panel.
Detailed description and function of each instrument and indicator light.
Explains the functions and display of the multifunction digital displays.
Describes initial startup procedures, warning lights, and system checks.
Function and emergency use of the engine stop switch.
Explanation of the ignition switch positions (LOCK, OFF, ON, PARKING) and key removal.
Procedure for locking the steering and warnings against misuse.
Warnings about gasoline's flammability, toxicity, and safe handling.
Importance of proper lubrication and safe handling of used engine oil.
Procedures for checking engine oil level and recommended change intervals.
Emphasizes brake importance, checking wear, and warnings about wet conditions.
Warnings regarding brake fluid handling and system integrity.
Recommendations for cleaning discs, replacing pads, and changing brake fluid.
Procedure to check the front brake fluid level and topping up instructions.
Guidance on topping up brake fluid and warnings about fluid exposure.
Procedure to check the rear brake system and fluid level.
Steps for topping up the rear brake fluid reservoir.
Warnings about exceeding MAX level and using clean equipment for topping up.
Steps after servicing brakes, including function checks and test rides.
Stresses clutch importance and checking efficiency before riding.
Warnings about clutch fluid contact, disposal, and maintenance.
Procedure to check the clutch fluid level and topping up.
Guidelines for topping up clutch fluid and warnings about exposure.
Importance of coolant level, maintenance frequency, and warnings about toxicity.
Strict warnings on coolant toxicity, handling, and proper disposal.
Procedure to check and top up the coolant expansion reservoir.
Advice on checking tire inflation, wear, and conditions.
Information on minimum tread depth and engine oil warnings.
Procedure to adjust engine idling speed if it becomes irregular.
How to check and adjust the throttle grip's idle stroke.
Instructions for safely mounting and dismounting the vehicle.
Detailed steps for safely getting on the vehicle.
Detailed steps for safely getting off the vehicle.
Emphasizes performing pre-ride checks for safety and vehicle condition.
Table detailing checks for brakes, accelerator, oil, tires, chain, etc.
General advice on vehicle power and the starting process.
Specific steps for starting the engine when cold, including choke use.
Explains display indications during starting and oil pressure warnings.
Explains the necessity of engine break-in for duration and function.
Specific guidelines for speed, RPM, and braking during the running-in period.
General safety rules and precautions before performing maintenance.
Chart detailing maintenance operations and their recommended intervals.
Explains the symbols used in the maintenance chart and notes on operation frequency.
Procedure for checking and topping up engine oil.
Step-by-step guide for changing engine oil and oil filter.
Instructions for cleaning and replacing the air cleaner element.
Step-by-step guide to remove the front wheel, including brake caliper removal.
Guide for reassembling the front wheel, including lubrication and checks.
Steps to remove the front brake calipers.
Guide for reinstalling front brake calipers, including screw torque.
Steps to remove the rear wheel, including chain and brake caliper considerations.
Guide for reassembling the rear wheel, including chain tensioners and sprocket.
Importance of checking brake function after rear wheel reassembly.
Procedure to check the drive chain slack and identify issues.
Steps for adjusting the drive chain tension and centering the wheel.
Proper methods for cleaning and lubricating the drive chain.
Checks for front suspension operation, oil seals, and component fastening.
Procedures for adjusting spring preload, rebound, and compression damping.
Adjusting spring preload and hydraulic damping based on use conditions.
How to visually check brake pad friction material thickness and replacement criteria.
Warnings about the risks of compromised braking efficiency due to worn pads.
Instructions for checking, cleaning, and replacing spark plugs.
Step-by-step guide for removing and installing spark plugs.
How to check and clean spark plugs using pressurized air, and when to replace them.
To Next Page