Need help?Do you have a question about the APRILIA Tuono V4 1100 Factory 2021 and is the answer not in the manual?
General| Displacement | 1077 cc |
|---|---|
| Maximum Power | 175 hp (129 kW) @ 11, 000 rpm |
| Transmission | 6-speed |
| Frame | Aluminum dual beam chassis with pressed and cast sheet elements |
| Seat Height | 825 mm |
| Dry Weight | 184 kg |
| Fuel Tank Capacity | 18.5 liters |
| Tires Front | 120/70 ZR 17 |
| Maximum Torque | 121 Nm @ 9, 000 rpm |
| Front Suspension | Öhlins NIX, 43 mm fully adjustable fork |
| Rear Suspension | Öhlins monoshock, fully adjustable |
| Front Brakes | Dual 330 mm discs, Brembo M50 monobloc calipers |
| Rear Brakes | Single 220 mm disc, Brembo caliper |
| ABS | Cornering ABS, multi-map |
| Traction Control | Yes, adjustable |
| Wheelbase | 1450 mm |
| Tires Rear | 200/55 ZR 17 |
| Engine Type | Liquid-cooled, longitudinal 65° V4, DOHC, 4 valves per cylinder |
Essential safety guidelines for handling fuel, hot parts, coolant, and hazardous materials.
Detailed technical data for the engine, including model, capacity, bore, stroke, and timing.
Tools required for vehicle diagnostics and electronic connections, including OBD cables.
Programmed maintenance schedule for US-LATAM market, detailing checks and replacements.
Procedures for checking engine oil level and replacing engine oil and filter.
Procedure for checking and adjusting valve clearance for front and rear cylinder heads.
Procedures for checking and topping up brake fluid for front and rear braking systems.
Methods for checking circuit continuity, ground connections, and voltage levels.
Guidance on checking, identifying, and replacing fuses in the vehicle's electrical system.
Information on control units (ASC, 11MP) including functions, diagnosis, and error codes.
Troubleshooting guide for common electrical errors and system malfunctions.
Detailed steps for disconnecting coolant, oil lines, and various components to remove the engine.
Instructions for installing the engine, including proper alignment and securing of components.
Procedures for removing the gearbox, its shafts, selector, and related components.
Detailed steps for disassembling, checking, and assembling the clutch system components.
Procedures for removing and installing cylinder heads, including valve cover and spark plugs.
Steps for valve removal, inspection of stem deviation, and installation.
Procedures for assembling the crankcase, including stud bolt torquing and lubrication points.
Procedures for removing and installing the cooling jets, oil pump, and blow-by system.
Procedure for removing front fork legs, including disconnection of brake calipers and connectors.
Steps for disassembling Sachs front forks, including oil discharge and component removal.
Procedures for adjusting and disassembling Ohlins front forks.
To Next Page