Advanced Printing Systems
SS205-V4+ LV - Technical Manual - Rev B Page 17
Note: It is recommended to have to divide the pulses into portion of equal number of black dots to avoid
Optical density variation on same dot line between several pulses of DOTSmax and the remaining
dots of last pulse.
Example 1: Dynamic division, 2 steps per dotline.
This printing mode offers an accurate way of current limitation during heating, and also
a way to control the printout speed in function of the number of black dots to heat.
Example 2: Dynamic division, Double scanning: 1 step per dotline.
This mode improves printing quality with increasing of TPH efficiency.
To Next Page
Loading...