Need help?Do you have a question about the Aqara Camera Hub G2H and is the answer not in the manual?
General| Resolution | 1080p Full HD |
|---|---|
| Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4GHz |
| Two-way Audio | Yes |
| Storage | MicroSD card (up to 32GB) |
| Power Input | 5V/1A |
| Operating Temperature | -10°C to 40°C |
| Field of View | 140° |
| Night Vision | Yes |
| Smart Home Integration | Apple HomeKit |
| Dimensions | 82.4 x 56.5 x 50.5 mm |
Download and install the Aqara Home app by scanning the QR code or searching the app store.
Connect the USB power cable to the product and power adapter. The red indicator light will flash upon successful startup.
Add the Camera Hub G2H via the Aqara Home app by following on-screen prompts for successful connection.
Bind the camera to HomeKit using the Apple Home app by scanning or manually entering the HomeKit Setup Code.
To Next Page