Need help?Do you have a question about the Aqara D100 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Material | Aluminum Alloy |
| Emergency Power Supply | USB-C |
| Battery Life | Up to 12 months |
| Auto Lock | Yes |
| Unlock Methods | Fingerprint, Password, Bluetooth, NFC, Mechanical Key |
| Connectivity | Bluetooth |
| Compatibility | Apple HomeKit, Aqara Home |
| Installation | DIY or Professional |
Summarizes user capacity, master user, password length, unlocking modes, and low battery status.
Instructions for marking door holes according to the template and drilling them.
Steps to install the door latch, strike box, and strike securely with screws.
Guide to installing the spindle and fastening the lock's connection rods properly.
Attaching the plastic baseboard, front panel, and routing the connecting cable.
Securing the back panel on the door and installing batteries for operation.
Verifying the installation by testing handle and key unlocking mechanisms.
How to unlock the door using a valid password and the '#' key.
Process for unlocking the door by presenting a registered RF card.
Procedure for unlocking the door using the mechanical key during power loss.
Instructions on how to change the master password via the keypad.
Steps to register new password users and RF cards to the lock.
Guide to removing individual user credentials like passwords or cards.
Procedure to delete all normal users, excluding the master user.
Steps to activate passage mode for frequent unlocking without identification.
Steps to deactivate passage mode and restore normal security.
Configuration steps for the lock's single user unlocking mode.
Configuration steps for the lock's double user unlocking mode.
To Next Page
