Aqara ZNMS11LM User Manual

Smart lock Aqara Smart Door Lock
User guide
Overview
The smart lock uses the ZigBee wireless protocol, supports opening with a ngerprint,
password, contactless card and usual mechanical key, has the function of blocking
through the peephole and alarms, according with a device, that has a function of a
network gateway (hereinafter «gateway»), you can congure the alarm mode through
the gateway and synchronize the lock with other smart devices.
1 - Touch keypad for entering the password;
Reading area of the contactless card;
2 - Fingerprint sensor
3 - Handle;
4 - Micro-USB - power connector for emergency cases (Micro-USB);
5 - Keyhole for emergency cases;
6 - Battery cover slider for batteries;
7 - Hole of the reset button;
8 - Lock button for opening the handle through the door peephole (to open the door, hold
the button and pull the handle down)
9 - Swivel bolt for locking the lock from the back;
10 - To open the keyhole cover, simultaneously press the left and right bottom corner of
the cover.

Aqara ZNMS11LM Specifications

General

Model	ZNMS11LM
Category	Door Locks
Connectivity	Zigbee
Power Supply	Battery
User Capacity	Up to 100 users
Battery	4 x AA batteries
Unlock Methods	Fingerprint, Mechanical key, App control
Fingerprint Capacity	50
Weight	Approximately 200g
Compatibility	Aqara Hub

Summary

Overview

Quick settings

Reset

Clear all data by pressing and holding the reset button for 8 seconds.

Add an administrator

Add fingerprint, password, and contactless administrator card based on voice prompts.

Add an user

Add user fingerprint, password, and card after administrator confirmation.

Download the mobile app

Download and install the Mi Home application for device control and integration.

Connecting the lock to the network

Connect the smart lock to the Mi Home gateway following application prompts.

Buy more

Purchase smart devices and items via the Mi Home app or QR code.

Recommendations for synchronization

Automatic light up after opening the door

Configure automatic light activation when the door is opened.

Automatically turn off alarm

Set the alarm to automatically turn off.

Main parameters