Screen Status Description
The screen will display the status as shown in
the figure every time batteries are loaded. At this time, install the
thermostat into the valve interface as soon as possible, and then
press the button 3 consecutive times or click "More Settings" in
the app to calibrate the valve.
This is designed for usage when you are
away for an extended period, to protect the water pipe from
freezing at low temperature.
The user can rotate the knob or set the target
temperature on the app as needed.
To Be Installed
Anti-Freezing Mode
Manual Mode
Note: Ensure that the thermostat is properly installed on the valve interface
before calibration.
-05-
To Next Page
Loading...
