8
3. Basic settings
In this chapter, you can configure the function mode of the device, inclu-
ding the working mode (such as image whitening), aimer setting, lighting
configuration, LED indicator setting and speaker setting. You only need to
scan the corresponding configuration code according to the requirements.
3.1. Scan mode
Manual trigger mode (default) Auto scan mode
3.2. Enable/Disable symbologies
Enable all symbologies Disable all symbologies
Enable all 1D symbologies Disable all 1D symbologies
Enable all 2D symbologies Disable all 2D symbologies
3.3. Inverse barcode
Decode regular code only (default) Decode inverse code only
Decode both regular and inverse code
To Next Page
Loading...
