Aqua-Base ESW 901 User Manual

U:\Affaires\Aqua-Base\ESW\09- Manuels Utilisateur\DOC UTILISATEUR ESW FRUKES 2023-06-Y3.doc VERSION 2023-06-Y3 FR/UK/ES Page 1/52
P3 MANUEL UTILISATEUR
p17 OWNER MANUAL
p31 MANUAL DE UTILIZACIÓN
ATTENTION: Lisez attentivement l’intégralité de cette documentation, avant d’installer, d’utiliser ou d’entretenir le
dessalinisateur AQUA-BASE. Vous éviterez ainsi les désagréments d’une opération incorrecte, dont les conséquences ne
seraient pas couvertes par la garantie.
WARNING: Read this documentation carefully in its entirety, before installation, use or maintenance of the AQUA-BASE
desalination unit. In this way you will avoid incorrect operating faults which may lead to consequences that will not be covered
by the guarantee.
ATENCIÓN: Leer atentamente el documento entero antes de instalar, utilizar o mantener la desalinizadora AQUA-BASE. Así,
evitará los errores debidos a una operación incorrecta cuya consecuencias no serían cobradas por la garantía.
12 VCC
ESW 301 / 601 / 901
35 l/h / 65 l/h / 105 l/h
24 VCC
ESW 302 / 602 / 902
35 l/h / 65 l/h / 105 l/h
Série ESW
Indice
:
Y
3
Validé par
:
GB
le
:
07
/
06
/20
23

Aqua-Base ESW 901 Specifications

General

Weight	110 kg
Category	Marine Equipment
Model	ESW 901
Type	Watermaker
Operating Temperature	5 - 40 °C
Storage Temperature	5 - 40 °C
IP Rating	IP 55

Summary

A - THE WATERMAKER

2 – CHARACTERISTICS

Technical specifications and types of AQUA-BASE ESW watermakers.

3- DESCRIPTION

3.1 - WATER SYSTEM – FLOW CHART

Detailed explanation of the water system components and their functions.

3.2 - ELECTRIC DRAWING AND CONTROL PANEL

4 – INSTALLATION OF WATERMAKER

4.1 - PREPARATION

4.2 – PLACING THE UNIT

4.3 - ELECTRICAL CONNECTION

Instructions for connecting the watermaker unit to the power supply.

4.4 – ASSEMBLING THE FITTINGS AND PIPES

C - STARTING THE WATERMAKER

1- FIRST START-UP

Detailed procedure for the initial startup of the watermaker unit.

2– NORMAL STARTING

Steps for starting the watermaker during regular operation.

3-STOPPING THE WATERMAKER

3.4-STOPPING WITH PRESERVATION

3.5 – STOPPING WITH WINTERING PROCEDURE: CLEANING + PRESERVATION (LONG TERM STOP)

Detailed steps for winterizing the unit including cleaning and preservation.

D – WATERMAKER MAINTENANCE

1 - MAINTENANCE SCHEDULE

Schedule outlining regular maintenance operations and frequencies.

3 – REPLACEMENT OF THE FILTER CARTRIDGE (Unit stopped)

5 – CLEANING OF THE MEMBRANE

Guidance on when and how to clean the RO membrane.