6
4.5 Application conditions
Ambient temperature Indoor installation, pump is intended for continuous
operation at this temperature range: -10 - 42℃
Water temperature
5℃-50℃
Salt pools Salt concentration up to 0.5%, i.e 5g/l
Humidity ≤90% RH, (20℃±2℃)
Altitude Not exceed 1000m above sea level
Installation The pump can be installed max. 2m above water level;
Protection Class F, IP55
5. SETTING AND OPERATION
5.1 Display on control panel:
① Running capacity / power display
② Running capacity / power indicator
③ Timer indicator 1/2/3/4
④ WIFI indicator
Backwash / unlock
Up / down: to change the value of the setting
Timer setting / power reading
On/off