Aquagem IP25 - 5. SETTING AND OPERATION

5
4.5 Application conditions
Ambient temperature
Indoor installation, temperature range: -10 - 42℃
Water temperature
5℃-50℃
Salt pools
Salt concentration up to 0.5%, i.e 5g/l
Humidity
≤90% RH, （20℃±2℃）
Installation
The pump can be installed max. 2m above water level;
Insulation
Class F, IP55
5. SETTING AND OPERATION
5.1 Display on control panel:
① Power consumption
② Running capacity / Flow rate
③ WIFI indicator
④ Unit of flow
⑤ Timer period
⑥ Timer 1/2/3/4
Backwash/unlock
Up/down: to change the value
(capacity/flow/time)
Switch between Manual-Inverter Mode and
Auto-Inverter Mode
Manual-Inverter Mode: The running capacity will be
set manually between 30%-120%
Auto-Inverter Mode: The running capacity will be
automatically adjusted between 30%-120% according
to the preset flow rate.
The default mode is Manual-Inverter mode.
Timer setting
On/off





