Need help?Do you have a question about the AquaScape Pond Powerhead and is the answer not in the manual?
General| Max Flow Rate | 2000 GPH |
|---|---|
| Power Consumption | 40 Watts |
| Cord Length | 25 feet |
| Flow Rate | 2000 GPH |
| Voltage | 120V |
Follow guidelines for proper grounding, GFCI outlets, cord inspection, and avoiding extension cords.
Ensure full submersion, attached filter screen, clear of moving parts, and avoid hazardous liquids.
Aquascape Inc. is not liable for losses or injury from failure to observe safety precautions or misuse.
Details flow rate, motor type, voltage, wattage, amperage, cord length, and dimensions.
Carefully unpack the unit and select a suitable location in the pond for optimal water movement.
Disguise the powerhead with materials and adjust the head for directional flow control.
Connect multiple units using splitters and extension cables for a complete pond system.
Check operation in winter, remove during power failure, and store in a frost-free location if freezing is a concern.
Remove debris from the unit's exterior to ensure maximum water flow and performance.
Clean the outer/inner cage and propeller assembly using fresh water or cleaner solution.
Addresses reduced water flow by checking debris, voltage, and propeller condition, and pump not working issues.
Lists available replacement parts, including cage kits and propeller kits, with item numbers.
Provides a 3-year warranty covering defects due to material and workmanship, with usage limitations.
To Next Page