Why AquaScape Water Pump hums and doesn’t push water?
If your AquaScape Water Pump hums but doesn’t push water, it may be necessary to clean the filter screen, sponge, and impeller. You may also need to remove the water chamber cover to inspect and clean the impeller rotor assembly and internal pump body. Ensure nothing is blocking or wrapped around the impeller and that the pump is receiving the correct voltage.
How to fix reduced water flow in AquaScape Ultra 400?
If you notice reduced water flow in your AquaScape Water Pump, it may be necessary to clean the filter screen, sponge and impeller.
General| Brand | AquaScape |
|---|---|
| Model | Ultra 400 |
| Category | Water Pump |
| Language | English |
Overview of the Aquascape Ultra™ Water Pumps and their suitability for water features.
Explains warning and tip symbols used in the manual for user guidance.
Details requirements for grounding, GFCI outlets, and cord handling to prevent electrical shock.
Describes kits for adding fountain heads, including types and compatibility with pump models.
Provides a table of flow rates, head heights, power, and warranty for different pump models.
Explains the pump's design suitability for various water feature applications like decorative fountains and ponds.
Instructions for connecting the pump to a GFCI outlet and checking for leaks after operation begins.
Details on the filter screen's design, removal, and the consequence of operating the pump without it.
Step-by-step guide on cleaning the filter screen and pre-filter sponge, including manual removal and hose rinsing.
Instructions for cleaning the pre-filter sponge to protect the pump from fine debris and potential damage.
Guidance on cleaning the pump's interior if flow rates remain diminished after cleaning the filter screen.
Steps to expose and inspect the impeller assembly for cleaning and potential issues.
Methods for cleaning scale buildup from the impeller and pump body using mild acids or cleaning products.
Identifies the impeller assembly as the sole moving component subject to wear and tear.
Details the parts included in the replacement impeller kit and the importance of noting their orientation.
Step-by-step instructions for installing the new impeller assembly, including bushing placement and shaft insertion.
Completes the impeller replacement by reinstalling bearing washers, the water chamber cover, and filter components.
Guidelines for storing the pump during winter to prevent freeze damage, including cleaning and frost-free storage.
Identifies reduced water flow as a common issue and suggests potential causes.
Addresses issues where the pump runs but does not move water, suggesting cleaning and inspection.
Covers scenarios where the pump fails to operate, pointing to potential GFCI trips or voltage issues.
Lists available replacement parts with corresponding item numbers for different pump models, illustrated with diagrams.
Outlines the terms and duration of the limited warranty, including coverage and exclusions.
Provides a direct link to download the Aquascape Instruction Manual for Ultra™ Water Pumps.
Lists company social media, website links, and other relevant online content for further information.
Links to other Aquascape and KENT product manuals for related water gardening equipment.
To Next Page
