Need help?Do you have a question about the AquaSure AS-HS48FM and is the answer not in the manual?
General| Cold Water Temperature | 5-10°C |
|---|---|
| Power Source | AC |
| Voltage | 220-240V |
| Frequency | 50/60Hz |
| Type | Water Dispenser |
| Cooling Method | Compressor |
| Cooling Capacity | 2L/H |
| Heating Capacity | 5L/H |
| Hot Water Temperature | 85-95°C |
| Material | Stainless Steel |
| Capacity | 18L |
Emphasizes reading manual and parts before installation.
Lists necessary tools for installing the water softener.
Lists environmental and location requirements for system installation.
Covers safe handling of the unit and electrical plug requirements.
Detailed instructions on how to safely turn off the main water supply.
Guides on attaching the bypass valve to the control head.
Steps for preparing the softener tank and control valve.
Instructions for connecting the softener to the plumbing system.
Guides on connecting the drain hose with proper air gap.
Instructions for connecting the brine line to the control valve.
Procedures for initial water fill, leak testing, and bypass operation.
Steps for powering the unit and initiating the backwash cycle.
Guide to selecting the regeneration trigger mode (Timer, Meter).
Instructions for setting the system's water capacity in gallons.
Finalizing the water capacity setting based on calculation.
Configuring regeneration schedule and override settings.
Provides the formula and an example for calculating total gallons.
To Next Page
