Need help?Do you have a question about the AquaSure HARMONY Series and is the answer not in the manual?
General| Series | HARMONY |
|---|---|
| Brand | AquaSure |
| Filtration | RO |
| Heating Capacity | 5L/hr |
| Voltage | 220V |
| Power Consumption | 500W |
| Material | Plastic |
| Color | White |
Instructions for registering the water softener using a mobile device for extended warranty benefits.
Reviewing all softener components and identifying necessary installation tools.
Essential safety precautions and water supply conditions for proper installation and warranty.
Visual guide illustrating the correct plumbing connections for softener installation.
Locating and turning off the home's main water supply valve before commencing installation.
Step-by-step instructions for securely attaching the control valve to the softener tank.
Connecting the softener's inlet and outlet to the house plumbing and the drain line.
Guidance on connecting the brine line from the control valve to the brine tank.
Procedures for flushing the system and verifying the absence of leaks after installation.
Familiarization with the digital control panel display, buttons, and indicators.
Steps involved in starting the system and initiating the first regeneration cycle.
Setting the current time on the control valve for accurate regeneration scheduling.
Configuring the system's regeneration trigger: Time Meter, Timer, or Meter Delayed.
Defining the total water capacity and unit of measurement for regeneration calculations.
Adjusting the preferred regeneration time and configuring the hours override function.
Configuring the duration of the backwash cycle for resin tank cleaning.
Setting the duration for the brine draw phase to ensure proper resin regeneration.
Adjusting the time allocated for the rapid rinse cycle to remove residual hardness.
Setting the duration for refilling the brine tank with water for the next cycle.
Information on calculating total gallons for optimal system programming using online tools or formulas.
Understanding the different information shown on the display during various operating modes.
Procedure to reset the control valve to its original factory default configuration.
How to initiate queued or immediate regeneration cycles manually.
Physical dimensions of the water softener unit and its main components.
Detailed performance metrics, flow rates, electrical ratings, and operating parameters.
Guidance on accessing online resources and support for troubleshooting system issues.
A detailed list of all components within the valve assembly, including part numbers.
Details on the warranty coverage for parts and labor for the water softener system.
Information on how to contact Aquasure support for warranty claims and assistance.
To Next Page
