What to do if Aquatec Fortuna Bathroom Aid lift has no motor noise?
If your Aquatec Bathroom Aid lift isn't making noise or moving, here's what you can check: * Make sure the battery is correctly inserted. * Ensure the battery isn't empty by recharging it. * Clean the contacts if they appear dirty. * Readjust the contacts if they seem bent. * If you suspect a damaged cable, contact your vendor for a replacement.
Why is my Aquatec Bathroom Aid bathlift sliding?
If your Aquatec Bathroom Aid lift is sliding in the bathtub, the suction cups may be worn or damaged. Replace the suction cups to resolve this issue.
What to do if the Aquatec Fortuna Bathroom Aid battery cannot be recharged?
If the battery of your Aquatec Bathroom Aid cannot be recharged, the battery may be defective. Replace the battery.
Why does my Aquatec Fortuna lift stop during lifting?
If your Aquatec Bathroom Aid lift stops during operation, it might be due to excessive load. Ensure that the person using the AQUATEC FORTUNA weighs less than 120 kg.
Why Aquatec Bathroom Aid lift can be moved upwards but not lowered?
If your Aquatec Bathroom Aid lift moves upwards but not downwards, the low-voltage protection may be activated. Try recharging the battery.
General| Brand | Aquatec |
|---|---|
| Model | Fortuna |
| Category | Bathroom Aid |
| Language | English |
To Next Page