AquaTechnix AQUA 4 Fun Series User Manual

25 |
10. Technical Data
Technical data at
50 Hz
Aqua 4 Fun
60
Aqua 4 Fun
100
Aqua 4 Fun
140
Aqua 4 Fun
160
Aqua 4 Fun
200
Heating capacity at
A19/W26°C [kw]
5.0 8.1 10.5 13.0 16.8
Heating capacity at
A26/W26°C [kW]
6.0 9.0 12.0 15.0 18.0
Heating capacity at
A15/W26°C [kW]
4.25 6.5 9.0 9.5 13.0
Rated power consumption
[A]
5.1 7.2 9.6 11.7 4.4
Power supply [V] 230 230 230 230 230
COP depending on the
operating state [ca. >]
66666
Electricaly input [kW] 1.04 1.45 1.98 2.45 2.90
Fuse [A] 1 pol. C 16 1 pol. C 16 1 pol. C 16 1 pol. C 20 3 pol. C 16
Connections glued
connection [mm]
Ø 50 Ø 50 Ø 50 Ø 50 Ø 50
Noise level 1/10 m free
fi eld [db(A)]
38/50 38/52 39/52 39/54 40/56
Acoustic power level 1 m
hemisphere [db(A)]
59 60 60 62 64
Refrigerant R410A/GWP
2088 Co²e(t) [kg]
0.5/1.04 0.8/1.67 1.0/2.08 1.1/2.29 1.6/3.34
Compressor Rotary
Water throughput rate
[m³/h]
2.3 3.0 4.5 5.3 6
Heat exchanger pressure
loss [kPa]
2.4 3.2 6.0 10 15
Dimensions approx. [mm] 790x330x580 952x360x610 952x360x610 952x360x610 1130x460x860
Weight approx. [kg] 36 50 65 75 98
Pool size with thermal
covering* [m³]
up to 15 up to 30 up to 40 up to 50 up to 60
* All values are based on an air temperature of 26 °C, a pool water temperature of 26 °C (pool covered,
thermal covering).
Utilisation time approx. mid-May to mid-September, with a daily fi lter pump running time of 10 to 12 hours.
A special version is required for different conditions of use. Ask your local swimming pool dealer.
Caution
Risk of frost at sub-zero temperatures through water-bearing parts!

AquaTechnix AQUA 4 Fun Series Specifications

General

Brand	AquaTechnix
Model	AQUA 4 Fun Series
Category	Heat Pump
Language	English