Fig 2Fig 1
IMPORTANT CLEANING & SERVICING
PRECAUTIONS
CLEANING: It is important to keep this appliance clean. Unplug and remove the unit from the
aquarium. Wipe exposed surfaces carefully with a damp cloth to remove any dust or mineral
deposits which may collect over time. Make sure all surfaces are dry before reinstalling.
SERVICING: In order to assure proper electrical connections and polarity, replacement parts and
servicing should be performed only by a qualified electrician.
MAINTENANCE
1. Always turn off light fixture and unplug from outlet prior to performing any maintenance.
2. Water spray and water scale can create an electrical and fire safety hazard if allowed to collect
on fixture. To prevent hazard, use over covered aquarium only and clean fixture regularly. Wipe
exterior of fixture down with a clean, freshwater dampened towel. Then dry thoroughly with a
second dry towel. Make sure all surfaces are dry before servicing.
INSTALLATION INSTRUCTIONS
• This product is recommended for use over glass-covered aquariums.
• Central Aquatics
®
glass covers fit on the inside lip of the aquarium to prevent seepage
out of the aquarium.
1. Position the fixture over aquarium by adjusting the legs (Fig 1) to the proper length so they
securely hold the fixture in place. Always center the fixture so that it provides maximum exposure
of light to all aquarium inhabitants.
2. Connect the transformer to the connector on the side of the light fixture.
3. Plug the transformer into an acceptable outlet. Be sure to incorporate a “drip loop” to prevent
water droplets from running down the cord and into the outlet should any water get onto
the cord.
4. Turn the LED lights on/off by touching the White and/or Blue Power Buttons (Fig 2).
To Next Page
Loading...
