Aqueon Tri-Scape User Manual

it’s all about the fish
Aquarium
Setup Guide
1. place aquarium on Strong, Stable Surface 2. add Gravel
Rinse gravel in colanderMake sure surface is level
•
Place aquarium on a flat, level
surface so the weight of the
aquarium is completely supported
•
Surface should be able to easily
support more than 50 lbs
•
Carefully pour rinsed gravel
into middle of aquarium
•
Spread gravel evenly around
aquarium bottom
•
Gravel depth should measure
1" - 3" from the bottom
Success Tip 1 Success Tip 2 Success Tip 3
Feeding
Give your fish one
small pinch of food
2 or 3 times per day.
Water Changes
Only change 25% of the
water once per month.
Never empty all the
water at once.
Lighting
Only keep aquarium
lights on for 8-10 hours
during the day, then
turn off at night.
8-10
Hours of Light
per day
25
%
Water Change
monthly
1 Pinch
of Food
2-3 times per day
it’s all about the fish
Aquarium
Setup Guide
1. place aquarium on Strong, Stable Surface 2. add Gravel
Rinse gravel in colanderMake sure surface is level
•
Place aquarium on a flat, level
surface so the weight of the
aquarium is completely supported
•
Surface should be able to easily
support more than 50 lbs
•
Carefully pour rinsed gravel
into middle of aquarium
•
Spread gravel evenly around
aquarium bottom
•
Gravel depth should measure
1" - 3" from the bottom
Success Tip 1 Success Tip 2 Success Tip 3
Feeding
Give your fish one
small pinch of food
2 or 3 times per day.
Water Changes
Only change 25% of the
water once per month.
Never empty all the
water at once.
Lighting
Only keep aquarium
lights on for 8-10 hours
during the day, then
turn off at night.
8-10
Hours of Light
per day
25
%
Water Change
monthly
1 Pinch
of Food
2-3 times per day
Making Success Simple
Drip Loop
See reverse for additional information.
Whenever you plug in any electrical
appliance, it's important to utilize
a "drip loop". This prevents water droplets
from reaching the electrical outlet, which
can cause a severe hazard.
To make a drip loop, follow the diagram to the right.
Simply drop the power supply cord below the level
of the outlet you're plugging it into. This way, if any
water should get on the cord, it will drip off before
it reaches the electrical outlet.
Power Supply
Cord
Drip Loop
Aquarium
Light Appliance
it’s all about the fish
Aquarium
Setup Guide
1. place aquarium on Strong, Stable Surface
Make sure surface is level
•
Place aquarium on a flat, level
surface so the weight of the
aquarium is completely supported
•
Surface should be able to easily
support more than 50 lbs
1. place aquarium on Strong, Stable Surface
4.
add Water
Add Water Conditioner as directed
Make sure surface is level
•
Place aquarium on a flat, level
surface so the weight of the
aquarium is completely supported
•
Surface should be able to easily
support more than 50 lbs
•
Pour room-temperature water
into aquarium over hand to
avoid moving gravel, plants
and décor
•
Fill aquarium with water to 1"
from top of frame
•
Add water conditioner
1. place aquarium on Strong, Stable Surface
4.
add Water
Add Water Conditioner as directed
Make sure surface is level
•
Place aquarium on a flat, level
surface so the weight of the
aquarium is completely supported
•
Surface should be able to easily
support more than 50 lbs
•
Pour room-temperature water
into aquarium over hand to
avoid moving gravel, plants
and décor
•
Fill aquarium with water to 1"
from top of frame
•
Add water conditioner

Aqueon Tri-Scape Specifications

General

Brand	Aqueon
Model	Tri-Scape
Category	Other
Language	English

Summary

Aquarium Setup Guide Safety and Tips

Drip Loop Safety

Utilize a 'drip loop' for electrical cords to prevent water droplets from reaching outlets, preventing hazards.

Lighting Tip

Keep aquarium lights on for 8-10 hours daily, turning off at night.

Feeding Tip

Feed fish one small pinch of food 2-3 times per day.

Water Changes Tip

Perform 25% water changes monthly, avoiding complete water removal.

Aquarium Setup Steps

Step 1: Place Aquarium on Stable Surface

Place the aquarium on a flat, level surface that can support over 50 lbs for stability.

Step 2: Add Gravel

Rinse and add 1-3 inches of gravel to the aquarium bottom, spreading evenly.

Step 3: Add Plants, Decor

Place plants and decor, securing bases with gravel to prevent movement.

Step 4: Add Water

Fill aquarium with room-temperature water to 1" from the top, adding water conditioner.

Step 5: Install Filter Hanging Bracket

Attach the filter hanging bracket securely to the back corner of the aquarium.

Step 6: Add Filter

Rinse filter cartridge, assemble, and hang filter on the bracket.

Step 7: Add Light Hood

Place light hood, ensuring cords pass through the opening, and plug in.

Step 8: Add Fish

Acclimate fish gradually over 20 minutes before adding to the aquarium.

Important Product Information

General Safety Instructions

Review and follow all safety guidelines to prevent injury, electric shock, and product damage.

Limited Warranty

Details the 90-day warranty, disclaiming implied warranties and consequential damages.

Filter Hanging Bracket Assembly

Bracket Grid Installation

Align the triangular grid's notches with the bracket's vertical wall and lock into place.

Filter Placement in Bracket

Place the filter into the assembled hanging bracket for secure attachment.