AQUOR V1+ - Care and Maintenance

www.aquorwatersystems.com
(800) 458-1749
Aquor
®
House Hydrant V1+
ASSE 1019C / ASME A112.18.1 / CSA B125.1 / AS/NZS3718 CERTIFIED
27
Care and Maintenance
Aquor
®
hydrants leave the factory fully
tested and operational. They are treated with
lubricant where needed. The hydrant requires
no scheduled maintenance to provide a long
operational life. If a problem does arise, all the
serviceable components are offered in repair
kits (contact us for more details).
Optional Cleaning
Clean with soap and water to maintain
corrosion resistance and appearance of the
marine-grade stainless steel. Use a soft brush
to remove any accumulated dirt, then rinse
with clean water. Use stainless steel polish as
needed.
Hard Water Buildup
The hydrant can be completely disassembled
for service or cleaning if needed. The inner
valve and stem are accessed through the rear.
Recommendations
• Unplug the hydrant after each use and
allow the hydrant to drain to provide
maximum freeze protection.
• Fully drain and depressurize your hose
after disconnecting.
• Store your hose connector out of the
elements to prolong their lifespan.
• Use care not to snag the connector O-rings
on the hydrant nibs.
CARE AND MAINTENANCE