AQUOR V1+ - Warranty and Contact

www.aquorwatersystems.com
(800) 458-1749
Aquor
®
House Hydrant V1+
ASSE 1019C / ASME A112.18.1 / CSA B125.1 / AS/NZS3718 CERTIFIED
31
Water leak from hydrant front, connected
Inspect hose connector O-rings for damage.
Replace or lubricate as needed.
Connector won't stay plugged in
Ensure water pressure is not too low. The hydrant
uses water pressure to seal, and is designed for
pressures of 25-125 PSI. If you are installing the
hydrant on a well or low-pressure system, contact
us for a higher weight hydrant valve spring, or add a
pressure booster.
Connector is difficult to connect or
disconnect
Inspect the main valve O-ring. Ensure no teflon tape
or sealant is applied. Inlet should thread smoothly
Double check there isn’t a shut o or check valve
along the plumbing line behind the hydrant. This can
cause additional pressure making it hard to connect.
Water leaking from hydrant front,
disconnected
Check your home’s water pressure.
High pressure can make it dicult to connect.
Try squeezing your hose nozzle while
simultaneously disconnecting.
If left outdoors in variable weather, water expansion
may have caused the connector’s internal check-
valve to seize. Try disassembling or removing the
connector’s check valve. Test with a dierent hose
connector.
There may be a piece of debris stuck in the
hydrant’s main valve. Shut o the water supply,
then test the valve’s forward/back operation with
your thumb or a tool. It should operate smoothly.
If needed, remove hydrant’s operating rod by
unscrewing the rear inlet.
If the issue occurs gradually over time, try cleaning the
hydrant’s outlet and lubricating the connector O-rings.
Contact Us
Visit our website to activate
your product warranty.
www.aquorwatersystems.com
/pages/warranty-registration
We stand behind every product we manufacture.
If you ever have an issue, contact us, and we will
make it right.
Aquor oers a limited lifetime warranty on all
stainless steel products and parts and 5 years
on all polymer components.
For any questions, please get in touch
with our customer service team at
contact@aquorwatersystems.com or call
us at (800) 458-1749 Mon-Fri 9AM-4PM.
Limited Lifetime Warranty
WARRANTY AND CONTACT