AQUOR House Hydrant V2+ User Manual

Aquor
®
House Hydrant V2+
ASSE 1019A CERTIFIED / meets IAPMO/cUPC
3
www.aquorwatersystems.com
(800) 458-1749
Overview
OVERVIEW
Aquor House Hydrant V2+
The Aquor
®
House Hydrant is a flush-mounted
hydrant with twist-lock connection system designed
for outdoor use.
The house hydrant is intended to be installed in
the exterior walls of homes and buildings. Upon
disconnection, a small amount of water self-drains
from the outlet. The Aquor
®
hose connector has a
built-in vacuum breaker for code approved
anti-siphon protection.
INCLUDED IN THIS KIT
x1 Stainless Steel Hydrant
x1 Hose Connector (CN-S1)
x1 Debris Cover
x4 #10 1.5” Mounting Screws
Read this entire instruction sheet before installing to ensure proper
installation. The information in this manual is subject to change
without notice.
Hydrant can only provide freeze protection when disconnected and
allowed to drain.
Intended for irrigation use and outdoor watering. Shall not be
subjected to more than (12) hours of continuous water pressure as
directed by ASSE code requirements.
Installation must comply with local codes and ordinances.
Please leave this manual with the property owner after completing the
hydrant installation.
FEATURES & BENEFITS
• Allows user to access water instantly by
connecting under full water pressure.
• Integral vacuum breaker in faceplate provides
anti-siphon protection.
• Robust O-ring connection system ensures a
reliable leak-proof seal, even at high water
pressures.
• Stainless steel operating rod and pressure-closed
valve provide zero-maintenance reliability for
years.
• Hydrant automatically self-drains upon
disconnection to provide freeze protection.
• Hydrant comes standard with ” female NPT
inlet. Rotatable 90° elbow and other optional
inlets available.
• Any ” accessory (e.g. water timers, splitters,
regulators) can be attached to end of hose
connector.
• Aquor
®
hose connector contains integral check
valve for additional backflow protection.

AQUOR House Hydrant V2+ Specifications

General

Brand	AQUOR
Model	House Hydrant V2+
Category	Plumbing Product
Language	English

Summary

Overview of Aquor House Hydrant V2+

Features and Benefits

Key features and advantages of the Aquor House Hydrant V2+ for outdoor use.

Included Components in the Kit

List of items provided in the Aquor House Hydrant V2+ installation kit.

Installation Procedure

Prepare Wall for Hydrant Mounting

Instructions for preparing the mounting surface and entry hole for installation.

Secure Hydrant to Exterior Wall

Steps for securely attaching the hydrant to the building's exterior wall.

Attach Plumbing Fitting to Hydrant

Guide on how to connect the appropriate inlet fitting to the hydrant body.

Connect Hydrant to Plumbing System

Instructions for connecting the hydrant's inlet to the water supply plumbing.

Operating the Hydrant

How to Use the Hydrant

Detailed steps for connecting/disconnecting hoses and ensuring proper drainage.

Hydrant Maintenance

Routine Cleaning and Freeze Protection

Guidance on cleaning, freeze protection, and long-term care for the hydrant.

Parts and Specifications

Hydrant Component Breakdown

Detailed list and diagram identifying all parts of the Aquor House Hydrant.

Technical Specifications

General Product Specifications

Overview of operating temperature, pressure, flow rate, and materials.

Model-Specific Dimensions

Dimensions and stem lengths for different Aquor House Hydrant models.

Troubleshooting Guide

Resolving No Water Flow

Solutions for issues where no water flows when the hydrant is connected.

Addressing Leaks and Water Spray

Troubleshooting steps for common leaks and water spray from the hydrant.

Warranty and Contact Information

Product Warranty Coverage

Details regarding the warranty period for Aquor House Hydrant components.

Customer Support Contact

Information on how to contact Aquor customer service for assistance.