AQUOR House Hydrant V2+ - Technical Specifications; General Product Specifications

Aquor
®
House Hydrant V2+
ASSE 1019A CERTIFIED / meets IAPMO/cUPC
17
www.aquorwatersystems.com
(800) 458-1749
Technical Specs
TECHNICAL SPECS
In the Box
Backflow Protection
Inlet x Outlet
Operating Temperature
Operating Water Pressure
Flow Rate
Plumbing Compatibility
Hydrant Material
Connector Material
O-Ring Material
Cover Material
Certifications
Warranty
SKU
SKU
VBHP002
VBHP004
VBHP006
VBHP008
VBHP010
VBHP012
Stem Length (A)
2” Hydrant
4” Hydrant
6” Hydrant
8” Hydrant
10” Hydrant
12” Hydrant
Overall Length (B)
4 /” (114 mm)
5 /” (141 mm)
7 /” (192 mm)
9 /” (241 mm)
11 /” (292 mm)
13 /” (343 mm)
Optional 90° elbow inlets reduce overall length by 1/2” (13 mm).
Hydrant, Debris Cover, Hose
Connector, x4 #10 1.5” Mount-
ing Screws, Install Instructions
Yes, built-in vacuum breaker
1/2 “ NPT (f) x 3/4” GHT (m)
33 -140 °F
25-125 PSI
6.8 GPM @ 52 PSI
All (PEX recommended)
316L Stainless Steel
Acetal Resin Polymer
Fluorocarbon Rubber
ASA Thermoplastic
ASSE 1019A, meets IAMP/cUPC
10 Years stainless steel,
5 Years polymer
VBHP002, VBHP004,
VBHP006, VBHP008,
VBHP010, VBHP012