Aquor
®
House Hydrant V2+
ASSE 1019A CERTIFIED / meets IAPMO/cUPC
29
www.aquorwatersystems.com
(800) 458-1749
Hose connector is di cult to connect or disconnect.
Warranty
PROBLEM
TROUBLESHOOTING, WARRANTY, & CONTACT
For any questions, please get in touch with our customer
service team at contact@aquorwatersystems.com or call
us at 1-800-458-1749 Mon-Fri 9AM-4PM.
Contact Us
Try squeezing your hose nozzle while simultaneously
disconnecting.
If left outdoors in variable weather, water expansion
may have caused the connector’s internal check-valve
to seize. Try disassembling or removing the connector’s
check valve. Test with a di erent hose connector.
There may be a piece of debris stuck in the hydrant’s
main valve. Shut o the water supply, then test the
valve’s forward/back operation with your thumb or a
tool. It should operate smoothly. If needed, remove
hydrant’s operating rod by unscrewing the rear inlet.
If the issue occurs gradually over time, try cleaning the
hydrant’s outlet and lubricating the connector O-rings.
SOLUTION
We stand behind every product we make. Aquor
o ers a 10 year warranty on all stainless steel
components and 5 years on all polymer components.
Our mission is to manufacture the highest quality
water connectors possible, engineered to last
decades of frequent use.
Visit our website to activate
your product warranty.
www.aquorwatersystems.com
/pages/warranty-registration
To Previous Page
Loading...
