Need help?Do you have a question about the Aragon 8008 and is the answer not in the manual?
Crucial safety precautions for device operation and user protection.
Instructions regarding electric shock and fire risk prevention.
Guidance on device placement, ventilation, and exposure to elements.
Procedures for cleaning, damage assessment, and qualified servicing.
Details using high-quality cables and observing polarity for speaker connections.
Recommends quality interconnects and using XLR shorting plugs for RCA inputs.
Introduces the E2C system for remote control and status monitoring via network.
Details connecting the amplifier to a network for E2C functionality.
Explains how to find the amplifier's IP address on the network.
Describes the web-based GUI for controlling power, mute, and monitoring status.
Details the settings page for fault status, channel mute, and brightness.
Lists common problems, possible causes, and recommended solutions.
Provides contact information for support and troubleshooting assistance.
Power| power output at 8 ohms | 200 watts per channel continuous power both channels driven |
|---|---|
| power output at 4 ohms | 400 watts per channel continuous power both channels driven |
| total harmonic distortion | less than 0.04% THD |
Input Specifications| input impedance single ended | 22K ohms |
|---|---|
| input impedance balanced | 44K ohms |
| input sensitivity at 1 watt output | 120 mV |
| input sensitivity full output | 1.68 V |
Performance| signal to noise ratio | greater than 110 dB A Weighted |
|---|---|
| damping factor | greater than 500 |
| slew rate | greater than 120 V/~S |
| voltage gain | 28 dB |
Weight and Dimensions| weight | 75 lbs |
|---|---|
| size | 19 W x 14 5/8 D x 6 5/8 H |
To Next Page