What to do if restoring factory defaults does not restore proper functionality to my Araknis Wireless Access Point?
If restoring factory defaults does not restore proper functionality, perform a hardware reset to reload the original base configuration file.
Details the features of various Araknis Networks access point models.
Lists and illustrates the items included in the product package.
Diagram showing the top panel layout of the access point.
Diagram showing the bottom panel layout of the access point.
Diagram showing the side panel layout of the access point.
Specifies the type of network cable and termination pattern required.
Details the Power over Ethernet (PoE) standards compatible with the device.
Outlines the power supply specifications for non-PoE installations.
Step-by-step guide for installing network wiring before access point setup.
Instructions for placing the access point on flat surfaces without a bracket.
Guide for mounting the access point onto standard junction boxes.
Instructions for mounting the access point on drywall surfaces.
Instructions for mounting the access point onto suspended ceiling tiles.
Explains the meaning of the status LED indicators for proper operation.
Default method for initial setup using Wi-Fi connection.
Accessing the interface using the device's configured system name.
Remote device management and notification via the OvrC platform.
Methods to locate the access point's IP address on the network.
Steps to save, apply, or revert configuration changes made in the web interface.
Displays current system name, service tag, firmware version, and VLAN ID.
Shows MAC address, client count, and data transmission for wireless radios.
Provides details on LAN speed, duplex, MAC address, and IP configuration.
Records access point events, configuration changes, and system status.
Details current radio settings, operation mode, and channel information.
Shows the number of SSIDs currently used and available for the access point.
Displays status of configured wireless networks, including SSID, security, and MAC address.
Lists currently connected wireless clients, their status, and signal strength.
Configure system name, admin credentials, LED status, and management VLAN.
Allows manual or automatic configuration of the device's date and time.
Set the time zone and configure Daylight Saving Time parameters.
Configure static IP address or enable DHCP for the access point's LAN interface.
Set LAN speed and duplex mode for the wired network connection.
Configure radio settings like interface, operation mode, channel, and bandwidth.
Details the number of SSIDs currently used and available for the access point.
Configure Band Steering and Fast Roaming features for wireless performance.
Explains Fast Roaming for reliable Wi-Fi with multiple access points.
Step-by-step guide to enable and configure Fast Roaming on access points.
Provides solutions for issues encountered with Fast Roaming functionality.
Set up and configure wireless networks (SSIDs) with security and broadcast options.
Configuration options for WEP encryption, noted as outdated and insecure.
Configure WPA-PSK Mixed and WPA2-PSK encryption for secure wireless networks.
Details WPA and WPA2 security settings, including RADIUS server options.
Step-by-step guide for configuring access points in repeater mode.
Manage user accounts, privilege levels, and passwords for access point login.
Configure access to the interface via HTTP port, Web Access, Telnet, and SSH.
Configure email notifications for system status, warnings, and abnormal conditions.
Enable or disable Bonjour and UPnP for network device discovery.
Schedule automatic reboots for the access point on a daily or weekly basis.
Monitor gateway connectivity and trigger reboots if network issues are detected.
Schedule when wireless networks (SSIDs) are available for use.
Example of how to configure the Wi-Fi scheduler for specific network availability.
Backup, upload, and restore access point configuration files.
Reset the access point to its original factory default settings.
Steps to perform a physical hardware reset to restore factory default functionality.
Upload and install new firmware to update the access point's software.
Configure advanced wireless parameters like transmit power and data rate.
Adjust radio settings including transmit power unit, data rate, and RTS/CTS threshold.
Set the maximum number of clients allowed to connect to each radio band.
Control wireless client access based on MAC address filtering.
Enable or disable MAC filtering and set the filter mode (Allow/Deny).
Add or delete client MAC addresses to the filter list.
Configure Wi-Fi Protected Setup (WPS) for easy device connection.
Instructions for connecting devices using the WPS push button method.
Instructions for connecting devices using the WPS PIN entry method.
Use the on-board tool to detect and analyze nearby wireless networks.
Analyze Wi-Fi channel interference and power levels for performance optimization.
Interpret usage, waveform, and real-time views to understand RF environment.
Regulate wireless network traffic flow by setting download and upload limits.
Configure Simple Network Management Protocol (SNMP) for network monitoring.
Configure SNMPv2 parameters including community names and trap destinations.
Configure secure SNMPv3 settings with username, protocols, and keys.
Configure Spanning Tree Protocol to prevent network loops and manage topology.
Configure Virtual Local Area Network (VLAN) settings for network segmentation.
Advanced setup for guest networks with Fast Roaming for seamless client handoff.
Steps to perform a physical hardware reset to restore factory default functionality.
General| Brand | araknis |
|---|---|
| Model | AN-100-AP-I-N |
| Category | Wireless Access Point |
| Language | English |
To Next Page
