Need help?Do you have a question about the araknis AN-110-SW-C-16P and is the answer not in the manual?
Details the process of mounting the switch in a structured wiring can.
Details the process of mounting the switch in a Strong™ VersaBox™ shelf.
Describes connecting the switch using a 30W PoE+ input.
Describes connecting the switch using a 15W PoE input.
Details connecting the switch via a dedicated power supply.
Explains the function of Power, 1Gbps, and Link/Act LEDs.
General| Model | AN-110-SW-C-16P |
|---|---|
| Ports | 16 |
| Power over Ethernet (PoE) | Yes |
| PoE+ | Yes |
| Switching Capacity | 32 Gbps |
| Forwarding Rate | 23.8 Mpps |
| MAC Address Table Size | 8K |
| Power Supply | Internal |
| Rack Mountable | Yes |
| Port Type | Gigabit Ethernet |
| Layer | 2 |
| PoE Standard | 802.3af |
| Jumbo Frame Support | 9K |
| Input Voltage | 100~240VAC, 50/60 Hz |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
| Dimensions | 440 x 44 x 1.7 mm |
To Next Page