Using Aranet4 PRO device with the Aranet PRO
base station
The Aranet PRO base station serves as a device for collecting, storing and maintaining data
from all types of Aranet sensors, including Aranet4 PRO. Up to 100 sensors can be connected
to a single Aranet PRO base station which has a capacity to store the measurement history up
to 10 years.
To connect the Aranet4 PRO to the Aranet PRO base station, initiate the sensor pairing mode
on the Aranet PRO base station and start the pairing on the Aranet4 device by changing the
switch position from disable (0) to enable (radio symbol). Alternatively, while switch is in the
enable position (radio symbol on screen is visible), remove and reinsert the batteries. Please
note, that by removing the batteries, the measurement history will be erased from the
Aranet4 memory.
Find out more about the Aranet PRO base station at a
ranet.com and follow the Aranet PRO
User Manual on how to pair Aranet sensors to the Aranet PRO base station.
Returns and warranty
In case of a return or a warranty claim, please contact your sales representative.
For Terms and Conditions refer to aranet4.com/terms-conditions.
Frequently asked questions (FAQ)
If you can’t find the answer that you are looking for in this manual, please take a look at the
Aranet Forum at forum.aranet.com. Otherwise send us a message to support@aranet.com.
Aranet
Forum
DISCUSS. GET SUPPORT.
EXCHANGE YOUR EXPERIENCE.
Additional links
More information about the product and documentation can be
found https://aranet.com/product/aranet4-sensor/
For more detailed information about Aranet products, please visit
www.aranet.com, contact your Aranet representative or write to info@aranet.com.
Product specifications are subject to change without prior notice. © 2021 SAF
Tehnika, JSC. All
rights reserved.
Aranet4 User Manual
6
To Next Page
Loading...
Need help?
General
