Need help?Do you have a question about the ARB CKMTA12 and is the answer not in the manual?
General| Voltage | 12V |
|---|---|
| Maximum Working Pressure | 150 PSI |
| Model Number | CKMTA12 |
| Pressure Switch | Yes |
| Duty Cycle | 100% |
| Included Accessories | mounting hardware |
| Type | Twin Motor |
| Suitable for | air lockers |
| Maximum Air Flow | 174 L/min (6.16 CFM) |
Essential steps and checks before commencing the compressor installation.
List of necessary tools and supplies for a successful installation.
Criteria and guidelines for selecting the optimal location to mount the compressor.
Adjusting the compressor outlet port orientation for optimal hose routing and fitment.
Procedures for drilling mounting holes and securely attaching the compressor.
Steps for attaching the air filter assembly to the compressor or extension tube.
Guidance on using an extension tube for the air filter, including diameter and length considerations.
Details on connecting the compressor outlet port for various applications like Air Locker or tire inflation.
Guidelines for securely mounting the compressor and Air Locker actuator switches inside the vehicle.
Detailed wiring diagram and instructions for connecting the actuator system components.
Instructions for correctly connecting the compressor's power wires to the vehicle's electrical system.
Procedure to check for air leaks in the installed system using a soap and water mixture.
Steps to verify the correct operation of the air system and Air Locker differential.
Step-by-step guide to identify and resolve electrical faults in the compressor system.
A checklist to ensure all installation steps have been completed correctly.
Detailed breakdown of components with part numbers and descriptions.
To Next Page
