ARB LINX User Manual

LINXDISPLAYQUICKSTARTGUIDE
7450102
GETTINGSTARTED
Turningthedeviceon
PressandholdthePowerButtonkey(8)forafewseconds
untilthescreenlightsup.
Bootingup
Uponstartup,ARBLINXwillbeloadedautomatically.
Optionkeys
Theonscreenoptionkeyshelpusersnavigatearoundthe
displaydevice.TogobacktoARBLINX,simplypress
the
center widgetinthehomescreen.
Settings
Togotosettings,swipefromthetopdown.Deviceispreset
foroptimumapplicationwiththeLINXsystem.Usersare
advisedtomaintainallsettingsatdefault.
Chargingthedevice
Thechargingportisatthesideofthedisplaydevice.UseARB
USBcable
providedformostefficientcharging.
Visitwww.arb.com.au formoreinformation.
1LightSensor
2 AudioJack
3USBPort
4 Camera
5DisplayScreen
6VolumeUpKey
7VolumeDownKey
8PowerButton
9Speaker
10 Microphone

ARB LINX Specifications

General

Brand	ARB
Model	LINX
Category	Monitor
Language	English

Summary

Getting Started with LINX

Turning the Device On

Press and hold the Power Button key (8) for a few seconds until the screen lights up.

Booting Up ARB LINX

Upon startup, ARB LINX will be loaded automatically.

Navigating with Option Keys

On-screen option keys help users navigate around the display device. Press the center widget to go back to ARB LINX.

Accessing Device Settings

Swipe from the top down to go to settings. Device is preset for optimum application with the LINX system.

Charging the LINX Device

The charging port is on the side of the display device. Use ARB USB cable for most efficient charging.

Locating FCC E-Label Information

Accessing Regulatory Information

View regulatory marks and related information via Settings > About phone > Regulatory information.

FCC Identification Details

FCC ID and P/N are listed on the device and within the battery compartment.

FCC Compliance and Warnings

RF Exposure Information and SAR Limit

Device tested against USA SAR limit. Information available online. Maintain 10mm body separation for compliance.

FCC Warning and Operation Conditions

Device complies with Part 15. Must accept interference and avoid causing harmful interference.