EasyManua.ls Logo

Arbaco ACW600C - Cleaning and Maintenance; Housing Cleaning; Filter Cleaning and Care

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Always unplug the unit from the power supply (wall outlet) before
beginning the cleaning.
H
o
us
i
n
g
Use a soft, damp cloth to wipe the body clean. Never use strong
chemicals, oil-based products, detergents, chemically treated cloths or
other cleaning solutions. These could possibly damage the housing.
F
il
t
e
r
·
Clean the filters every two weeks, if filters are blocked by dust,
machine efficiency will be reduced.
·
Use a vacuum cleaner or tap the filter lightly to remove loose dust
and dirt from the filters and then rinse them thoroughly under running
water. You may also immerse it gently into warm water with a neutral
detergent, rinse it, and dry it thoroughly in a shaded place.
In either case, water should not be warmer than 104
°
F.
·
Dry thoroughly with a soft cloth before inserting them back
into the unit.
Notice! Never operate the air conditioner without the filters.
Please Note: Active carbon filter can be taken out after
removing the filter frame and should be cleaned or changed
every 2-3 weeks based on the environment.
Cleaning

Related product manuals