1-5 Applications
The TIG series can weld most of the metal materials like carbon steel, stainless steel, etc.
The power source is designed for the following recommend areas:
Boiler and pressure vessel fabrication
Chemical industry
Power generation
Pipe line
Automotive manufacture
Machinery manufacture
1-6 Warning label
The warning label is affixed on the top of machine.
Fig. 1-6-1: Warning label
2-VERSIONS BRIEFS
Professional welding of special materials requires special welding parameters. Different
models of the power sources are matched to different weldings.
ARC series
This series use the MOSFET tube as inverter device, the inverter frequency is as high as
100KHZ. This series welding machines is suitable for STICK and TIG welding.
ARC II series can weld cellulose electrodes.
To Next Page
Loading...
