ARC MLR-1105 - Operating Transmitters and Receiver Chime Unit

With LMDT-609 With LMST-606
Operating transmitters (such like LMLT-711, LMDT-609 and LMST-606) and receiver chime unit:
 If the sound volume is setup at “High”, “Medium” or “Low” level, when chime catches a signal from the paired transmitter and give sound
ringing while LED light is at the same time and continuing flashing for about 12 seconds, the receiver chime will re-act another sound if
catching another signal from transmitter upon the prior sound is ended although the LED light flashing is still.
 If the sound volume is setup at “Mute”, when chime catches a signal from the paired transmitter, the LED light starts to flash for about 12
seconds. When the receiver catches another signal from transmitter within the 12 seconds, LED light flashing will stop for about 1
second and continue to flash.
 When pairing the transmitter with MLR-1105, no matter the sound volume is High, Medium ,Low or Mute, it still can be manually adjusted to
any sound volume with last ringtone when normal operation.