ARC MLR-1105 - Changing Battery; Transmitter Battery Replacement; Receiver Battery Replacement

To Next Page

To Previous Page

CHANGING BATTERY:

Transmitter

 Unclip the front cover from the front of the Transmitter (bell push unit) using a small screw driver.

 Remove the battery and replace using a new fresh “CR2032” battery, making sure the polarity is correct.

 Replace the front cover making sure the clips are correctly aligned and firmly push the case together.

Receiver

 Take off the battery compartment cover.

 Take out the batteries and replace with new fresh AA (1.5V) * 3 Duracell Alkaline batteries .

 Replace battery ready and correct, “Du-Du” sound is heard to confirm.

 Close the battery compartment cover back to the chime receiver completely.