7
Issue Date: 7/4/2020
4. Pairing / Un-pairing Device
PAIRING / UN-PAIRING
Enter “Learning Mode”
To Pair:
Press button once (Red LED quick flash once)
To Un-Pair:
Press button twice (Red LED quick flash twice)
“M series” system
If you are controlling the “M series” system receiver, the ‘All On-Off’ function will
be automatically stored upon pairing each individual receiver.
“L series” system
If you are controlling the “S series” system receiver, make sure to pair each
receiver intent to be memorize under the ‘All On-Off” button.
And or un-pair each receiver intent to be deleted under the ‘All On-Off’ button.
To Next Page
Loading...
