8
Issue Date: 7/4/2020
5. Operation
Mini remote control is compatible to S and M series receivers. Please refer to
the relevant user guide for detailed operation.
Channel I operation example.
Turn the load ON:
Press channel I button once. Red LED quick flash once.
Turn the load OFF:
Press channel I button twice. Red LED quick flash twice.
Dim the load:
1. Press button once to turn ON load
2. Press and hold down button again to start dimming, load will start to adjust.
3. At the desired level release button to stop.
During dimming process when the load level reaches to the lowest or
brightest, to continue dimming release button then press button again to start
dimming.
Next time switching ON the load will return to the previous stipulated brightness.
To Next Page
Loading...
