Arcam Alpha 7SE - Technical Specification; Worldwide Guarantee; Claims under Guarantee

Technical specification
Alpha 7SE
24 bit multi-level D^lta-Sigma digital to analogue conversion.
bit PWM DAC plus HDCD
- - - - - : - ----- - -—:--
High resolution proprietary multi-bit current output digital to analogue conversion.
24 bit dCS Ring DAC plus HDCD
>++ ■ '
Rower consumption(max)_25VA max
Dimensions W/D/H mm. 430x290x85
Weight _ Alpha 7SE _ 3.6kg nett/ 5.1 kg packed
_ Alpha 8SE 4.1kg nett/5.6kg packed
Alpha 9" I I 4.1 kg nett/5.6kg packed
— . . - - -- -
Supplied accessories Mains lead
Remote control
tir a.:'- yr IIKSr&M
~...‘.' ■ ....— . • ■ ■ " - ■ . .
2xAAA batteries
i ...
E&OE
lliSllli lli liiiitl
Guarantee
WORLDWIDE GUARANTEE
This entitles you to have the unit repaired free of charge, during
the first two years after purchase, at any authorised Arcam
distributor provided that it was originally purchased from an
authorised ARCAM dealer or distributor The manufacturer can
accept no responsibility for defects arising from accident, misuse,
abuse, wear and tear; neglect or through unauthorised adjustment
and/or repair, neither can they accept responsibility for damage or
loss occurring during transit to or from the person claiming under
the guarantee.
The warranty covers:
Parts and labour costs for two years from the purchase date.
After two years you must pay for both parts and labour costs.
The warranty does not cover transportation costs at any time.
CLAIMS UNDER GUARANTEE
This equipment should be packed in the original packing and
returned to the dealer from whom it was purchased, or failing this,
directly to the Arcam distributor in the country of residence.
It should be sent carriage prepaid by a reputable carrier - NOT by
post. No responsibility can be accepted for the unit whilst in
transit to the dealer or distributor and customers are therefore
advised to insure the unit against loss or damage whilst in transit.
For further details contact Arcam at:
ARCAM Customer Support Department, Pembroke Avenue,
Denny Industrial Centre, Waterbeach,
Cambridge, CB5 9PB, England.
Telephone: (01223) 203203 Fax: (01223) 863384
e-mail: support@arcam.co.uk
problems:
If your dealer is unable to answer any query regarding this or any
other Arcam product please contact Arcam Customer Support on
+44 (0) 1223 203203 or write to us at the above address and we
will do our best to help you.