Need help?Do you have a question about the Arcam DV79 and is the answer not in the manual?
General| Brand | Arcam |
|---|---|
| Model | DV79 |
| Category | DVD Player |
| Language | English |
Provides essential safety precautions and warnings for operating the appliance.
Confirms adherence to international electrical safety standards, specifically IEC 60065.
Explains how to use the manual for installation, setup, and operation of the DV79.
Lists the items included with the Arcam DV79 DVD player upon purchase.
Details inserting batteries and basic guidelines for using the remote control.
Lists all disc formats playable by the Arcam DV79, including DVD, CD, MP3, and WMA.
Provides information on DVD-R/RW, CD-R/RW, compressed audio, and PC-created disc compatibility.
Explains the function and benefits of the HDMI connection for high-quality audio and video.
Provides guidance on placing the DV79 unit for optimal ventilation and stability.
Details connecting the DV79's various video outputs (Composite, S-Video, Component, RGB/SCART) to display devices.
Instructions for using the progressive scan video output for enhanced picture quality.
Guides on connecting via HDMI and utilizing digital audio outputs for external decoders.
Details connecting analogue audio outputs and the remote control input jack.
Instructions for safely connecting the unit to the mains power supply.
Overview of basic operation and description of the DV79's front panel controls.
Covers loading, playing, fast play, skipping, pausing, and stopping discs.
Explains how to use the front panel buttons to navigate menus.
Explains the High-Definition Multimedia Interface technology and its capabilities.
Provides steps and recommendations for connecting the DV79 to HDMI-equipped devices.
Addresses common video and audio problems encountered when using the HDMI connection.
Covers buttons for power, display, volume, clearing input, and basic operations.
Details buttons for playing, pausing, skipping, fast play, and disc navigation.
Explains buttons for accessing setup menus, disc menus, and programming playback.
Covers TRIM, ZOOM, SUBT, TITLE, RTN, PL, P MODE, SRCH, MEM, and ANGLE functions.
Details the STATUS, AUDIO, and ANGLE buttons for playback information and selection.
Introduces the Set-up menu for configuring the player to your system and preferences.
Guides initial setup for displaying a picture, recommending composite video for compatibility.
Explains how to enter, navigate, and change options within the Set-up menu pages.
Configuration of display messages, menus, subtitles, remote type, and disc priority.
Sets HDMI plug-and-play and the video standard (Auto, NTSC, PAL) based on display capabilities.
Configures progressive scan output and the display aspect ratio (4:3, 16:9).
Controls the type of video output for Component and SCART connections.
Controls the type of video output for the HDMI connection.
Adjusts the black level for NTSC video output, with options for 0 IRE and 7.5 IRE.
Selects between Bitstream and Stereo PCM digital audio output formats.
Sets default audio track language and down-sample rate for external audio decoders.
Enables audio compression for quiet listening and configures Pro Logic II decoding modes.
Adjusts soundfield depth, phantom centre image, and surround effects for Pro Logic II Music.
Configures speaker placement delays and measurement units for audio synchronization.
Controls subwoofer volume trim settings for multi-channel and stereo sources.
Manages low-frequency redirection for stereo sources and sets the bass crossover frequency.
Adjusts delays for speaker placement to synchronize sound arrival.
Corrects digital video delay to resolve lip-sync issues.
Uses test noise for calibration and adjusts relative speaker sensitivity (volume).
Sets a password and rating level to restrict content playback, enabling parental control.
Saves all configured settings and exits the Set-up menu.
Allows navigation to specific times or chapters on DVD and VCD discs.
Enables repeat, shuffle, and A-B repeat functions for enhanced playback control.
Guides on creating custom playback sequences for DVD-video and DVD-audio discs.
Instructions for creating custom playback sequences for VCD discs.
Covers starting, stopping, and managing programmed playback sequences.
Explains the elements and commands displayed on the disc navigator screen.
Describes the different operating modes for navigating and playing media files.
Details how to navigate directories and play files in Browse mode.
Instructions for creating custom playback sequences for audio CDs and CD-ROMs.
Explains how to use the Repeat and Shuffle functions for audio CDs.
Lists decimal codes for power, playback, display, and advanced remote control commands.
Details power requirements, consumption, dimensions, weight, and video output specifications.
Covers audio output levels, frequency response, THD+N, S/N ratio, digital output, and supplied accessories.
Outlines the terms and conditions for the two-year limited warranty.
Provides procedures for warranty claims and contact information for customer support.
Information on how to register the Arcam product online for warranty and service.
Describes the RS232 protocol and defines communication conventions and data transfer format.
Details the structure of ASCII commands, responses, and answer codes used for control.
Explains how player state changes are communicated and defines answer codes for command processing.
Defines codes that indicate the current operational status of the DV79 player.
Demonstrates a typical command and response sequence for controlling the player.
Specifies commands for changing the DV79's power state and managing standby mode.
Specifies commands for adjusting the brightness of the front-panel display.
Details the command to request the current playback time of a disc.
Details the command to request current title/group information for a DVD disc.
Details the command to request current chapter/track information for a disc.
Details the command to query the current operational status of the player.
Commands to enable or disable full-duplex status updates from the DV79.
Command to retrieve the software version of the RS232 command protocol.
Commands for basic disc playback operations like play, stop, and pause.
Commands to set the screen image enlargement level.
Commands for selecting slow or fast forward/rewind speeds for disc playback.
Command to change the audio stream selection for a DVD disc, including format and channel codes.
Commands to change to the next or previous display page.
Command to switch playback mode between shuffle and non-shuffle for audio CDs.
Command to change the subtitle selection for a DVD disc, including language codes.
Commands to change the camera angle selection for a DVD disc.
Commands to open, close, or query the state of player menus.
Commands for sending numbers to the DVD player, digit by digit.
Commands to clear a numerical entry or field on the screen.
Commands to move and select the highlight on the screen, including OK function.
Command to play the top-level disc menu.
Command to play the title-level menu of the disc.
Command to return to the previous-level disc menu screen.
Commands to open or close the DV79's disc drawer.
Commands to set the player's repeat state.
To Next Page