Arcam rPLAY - Specifications; Compatibility and System Requirements

E-10
Specications
DAC Texas Instruments PCM5102
Frequency response 20Hz–20kHz
Total Harmonic Distortion + Noise 0.0007%
Signal-to-noise ratio (A-weighted) 117dB
Output level Fixed level 2.15V RMS
Variable level 0–2.15V RMS
Supported audio file formats mp3 (MPEG Layer III)
m4a, aac (Advanced Audio Coding / Apple Lossless)
flac (Free Lossless Audio Codec)
wav (Waveform Audio File)
File quality (see note below) Up to 24-bit/192kHz
Power requirements (max) 12V DC, 2.0A
Dimensions (WxHxD) 194 x 44 x 124mm
Net weight 1.1Kg
Supplied accessories Power supply with interchangeable plugs
Wi-Fi antenna
Stereo phono–phono cable
Digital phono cable
Ethernet cable
User manual and registration card
E&OE. All specification values are typical unless otherwise stated
Compatibility and System Requirements
• A Windows PC running Windows 7 or higher (32 or 64 bit)
• An Android device running Android 2.2 or higher
• Supports iOS 7 or later for setup using Wireless Accessory Configuration
• AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and
PC with iTunes 10.2.2 or later
• For optimal Play-Fi streaming experience, a wireless router rated at least N600 is recommended
NOTE:
Files up to 16-bit/48 kHz are streamed without compression or transcoding. High resolution audio files
(24-bit/192kHz), are down-sampled to 16-bit/48kHz for transmission. This allows for the most reliable streaming
experience over Wi-Fi to multiple speakers.
For those who wish to hear high resolution audio as originally intended, Critical Listening mode in the DTS
Play-Fi app will enable native rendering of high resolution files up to 24/96, without down-sampling or network
synchronization adjustment. In this way, audio files retain their original audio integrity. For more details regarding
the Critical Listening mode please refer to https://play-.com/faq/entry/critical-listening-mode.