arcelik BEKO K70520NLU User Manual (English)

Melissa Phillips MDJul 25, 2025

What to do if E2 Fridge Evaporator Error is flashing on my Arcelik Refrigerator?

C
courtneymcgeeJul 26, 2025
If you see the E2 error flashing on your Arcelik Refrigerator, start by checking the cables connected to the control board sensor socket (KN6) pins no. 3 and 4. If the cables are properly connected, use a multimeter to measure the sensor resistance from the control board KN6 pins no 3 and 4. The measured value should be between 5K. If the sensor resistance is not appropriate, replace the control board, as the sensor cannot be replaced since it is in polyurethane.

Brand	arcelik
Model	BEKO K70520NLU
Category	Refrigerator
Language	English

Brand

arcelik

Model

BEKO K70520NLU

3. General Safety Warnings

3.1. HCA Warning

Warning regarding the use of R600a gas in the cooling system. Handle with care.

3.2. For Products with Water Dispenser

Requirements for water dispenser installation, including water pressure and type.

3.3. Intended Use

Specifies the product is for domestic food storage, not commercial use.

3.4. Child Safety

Precautions to keep children away from packaging and the operating appliance.

3.5. Compliance with WEEE Directive and Disposing of Waste Product

Guidelines for responsible disposal of electrical equipment.

3.6. Package Information

Notes on recyclable packaging materials and their disposal.

3.7. Disposing of the Waste Product

Instructions for proper disposal of the refrigerator at end of life.

5. Installation

5.1. Transportation Instructions

Guidelines for safely moving the appliance during transport.

5.2. Installation Instructions

Requirements for room volume, temperature, and clearances for installation.

5.3. Appropriate Location for Installation

Advice on choosing a suitable, safe, and functional place for the refrigerator.

5.4. Electrical Connection

Instructions for safe and compliant connection to the power supply.

5.5. Floor Balance Adjustment

Procedure for leveling the refrigerator using adjustable feet.

5.6. Water Connection to Ice Machine

Steps for connecting the appliance to an ice machine's water supply.

11. Electronic Control System

11.1. U2 Boards

Details on the location and function of the U2 control board.

11.2. Freezer Drain Heater

Description and function of the heater for the freezer compartment drain.

11.3. FF Ambient Heater

Explanation of the FF ambient heater's role in preventing freezing.

11.4. Defrost Heater

Information on the defrost heater's operation for ice melting.

11.5. Electric Circuit Diagram

Schematic representation of the refrigerator's electrical connections.

13. Troubleshooting

13.1. Refrigerator is not running

Diagnostic steps for when the appliance fails to operate.

13.2. Condensation in the Fridge Compartment

Reasons for condensation and actions to take to resolve it.

13.3. Compressor is not running

Troubleshooting guide for a non-operational compressor.

13.4. Refrigerator is running frequently or for a long time.

Analysis of factors causing prolonged or frequent operation.

13.5. Temperatures are too low

Steps to address situations where temperatures are excessively low.

13.6. Refrigerator runs noisily

Identifying causes and solutions for noisy refrigerator operation.

13.7. Sounds coming from the refrigerator.

Troubleshooting specific noises originating from the appliance.

13.8. Moistening on the inner walls of the refrigerator

Addressing dampness and moisture accumulation inside the fridge.

13.9. Condensation on the outside of the refrigerator

Explaining and resolving external condensation issues.

13.10. Doors cannot be closed.

Troubleshooting why refrigerator doors fail to close properly.

13.11. Sensor Error

Diagnosing and resolving errors related to internal sensors.

13.12. Initial Operation/Power Failure

Understanding initial setup and power interruption behaviors.

14. Attachment/Detachment Processes of Parts

14.1. Upper Hinge Lid

Procedure for removing and reattaching the upper hinge cover.

14.2. Removing the Doors

Step-by-step guide for detaching and reattaching the refrigerator doors.

14.3. Removing Door Handles

Instructions for safely removing and refitting the door handles.

14.4. Changing the Opening Direction of the Door

Guide to reversing the door swing for installation flexibility.

14.5. Board Cover and Electronic Boards

Steps to access and service the main control board and related components.

14.6. Fridge Compartment Illumination Group and LED Board

Procedure for removing and replacing the internal lighting system.

14.7. Sensor Cover

Instructions for removing and replacing the cover protecting internal sensors.

14.8. Crisper Sliding Rails

Method for detaching and reattaching the rails for crisper drawers.

14.9. Second Floor Crisper Sliding Rails

Procedure for removing and refitting the sliding rails for the second crisper.

14.10. Crisper Cover

Steps to remove and replace the cover of the crisper compartment.

14.11. Second Floor Crisper Cover

Instructions for detaching and reattaching the cover for the second crisper.

14.12. Fridge Compartment Evaporator Cover Group

Guide to removing and reinstalling the evaporator cover assembly.

14.13. Freezer Compartment Evaporator Cover Group

Procedure for detaching and reattaching the freezer evaporator cover.

14.14. Thermostat Setting Box

Steps to remove and replace the thermostat control unit.

14.15. Reed Sensor Board

Instructions for detaching and refitting the reed sensor and its board.

14.16. Above-Body Pediment and Connection Sheet Iron

Procedure for removing and attaching the upper body trim and connection plate.

14.17. Upper Hinge

Instructions for removing and refitting the upper hinge assembly.

14.18. Lower Hinge and Adjustable Foot

Steps to detach the lower hinge and adjustable foot.

14.19. Compressor Rear Cover

Procedure for removing and reinstalling the compressor's rear protective cover.

14.20. Evaporation Container

Instructions for removing and refitting the compressor's evaporation container.

14.21. Terminal Box Cover

Method for removing and attaching the terminal box cover.

14.22. Run Capacitor

Procedure for removing and refitting the run capacitor.

14.23. Filter Box

Instructions for removing and attaching the filter box.

14.24. Thermic Relay Group

Steps to remove and replace the thermic relay assembly.

arcelik BEKO K70520NLU User Manual

Table of Contents

Questions and Answers:

arcelik BEKO K70520NLU Specifications

Summary