To Next Page
P
Paul WongJul 25, 2025
What to do if E2 Fridge Evaporator Error is flashing on my arcelik BEKO K70520NU Refrigerator?
- OowilliamsJul 25, 2025
If you see the E2 error flashing on your Arcelik Refrigerator, start by checking the cables connected to the control board sensor socket (KN6) pins no. 3 and 4. If the cables are properly connected, use a multimeter to measure the sensor resistance from the control board KN6 pins no 3 and 4. The measured value should be between 5K. If the sensor resistance is not appropriate, replace the control board, as the sensor cannot be replaced since it is in polyurethane.
General
