arcelik BEKO K70520NU User Manual

AG2014 70 CM REFRIGERATORS 13.11.2013 / REV NO:
00
39
14.4. Changing the Opening Direction of the Door
To change the door opening direction, primarily the hinge lid should be removed with the help of a flat-
head screwdriver as step 4.1. Middle hinge is removed to detach the lower door and upper door (See,
4.2). Screws fastening the upper hinge are unscrewed with the help of a torque-tip screwdriver.
Plug opposite to the opening side of the upper hinge shall be removed with the help of a flat-head
screwdriver or a box cutter.
Afterwards, the hinge which has been removed shall be screwed on to the other side, again with 2
screws.
The plug which will close the 2 holes from which the upper hinge has been removed shall be fit into
these holes manually.
Upper hinge lid shall be attached on the hinge again by applying step 4.1 in reverse order.
Screws on the lower hinge should also be removed in the same way. First of all, plug on the adjustable
foot shall be removed with the help of a screwdriver to remove the adjustable foot. Then, the screw
connections of the lower hinge shall be disconnected.

arcelik BEKO K70520NU Specifications

General

Brand	arcelik
Model	BEKO K70520NU
Category	Refrigerator
Language	English