To Next PageTo Next PageWhy my arcelik K60400NE Refrigerator does not operate?
If your Arcelik Refrigerator isn't operating, first ensure it's properly plugged into the wall socket. Also, check the fuse of the socket or the main fuse to see if it has blown out.
What to do if the temperature in arcelik K60400NE Refrigerator or freezer is very high?
If the temperature in your Arcelik Refrigerator or freezer is too high, try the following: * Adjust the fridge or freezer temperature until it reaches a sufficient level. * Avoid opening the doors frequently. * Ensure the door is completely closed. * Allow hot food to cool before placing it in the refrigerator. * Remember that a recently plugged-in refrigerator takes time to cool down completely.
Why arcelik K60400NE Refrigerator compressor is not running?
If your Arcelik Refrigerator compressor isn't running, it could be due to a few reasons. It might be in defrost cycle which is normal. If there was a recent power failure, the protective thermic of the compressor might have blown out; the refrigerator should start running after approximately 6 minutes. If it does not, please call the service. Also, ensure the refrigerator is properly plugged into the socket and check for any power failures.
Why is my arcelik K60400NE running frequently or for a long time?
If your Arcelik Refrigerator is running frequently or for a long time, several factors could be the cause. A new, larger refrigerator naturally operates longer. High room temperature or recently added hot food can also extend running time. Ensure doors are opened less frequently and are tightly closed. Also, the refrigerator temperature may be set too low; in this case, adjust it to a warmer setting and wait.
What to do if the Arcelik Refrigerator door(s) is (are) not closing?
If your Arcelik Refrigerator door(s) is (are) not closing, make sure that food packages are not obstructing the door. Also, ensure the refrigerator is completely vertical by adjusting the elevation screws. Finally, check that the floor is level and strong enough to support the refrigerator.
Why is there condensation on the inner walls of my arcelik K60400NE Refrigerator?
If you notice condensation on the inner walls of your Arcelik Refrigerator, it's often due to hot and humid weather, which increases icing and condensation. Make sure the doors are closed completely and avoid opening them frequently.
What to do if food kept in the arcelik K60400NE Refrigerator compartment drawers are freezing?
If food in the fridge compartment drawers of your Arcelik Refrigerator is freezing, it's likely that the fridge temperature is set too low. Adjust the fridge temperature to a warmer setting and then check again.
What to do if freezer temperature is very low in arcelik K60400NE Refrigerator?
If the freezer temperature in your Arcelik Refrigerator is very low while the fridge temperature is sufficient, adjust the freezer temperature to a warmer degree and check again.
What to do if fridge temperature is very low in arcelik K60400NE?
If the fridge temperature in your Arcelik Refrigerator is very low while the freezer temperature is sufficient, adjust the fridge temperature to a warmer degree and check.
How to get rid of bad odor inside the Arcelik Refrigerator?
If there's a bad odor inside your Arcelik Refrigerator, clean the inside with a sponge, warm water, or carbonated water. Also, the smell might be caused by some containers or packaging materials; try using different containers or packaging.
General| Brand | arcelik |
|---|---|
| Model | K60400NE |
| Category | Refrigerator |
| Language | English |
Details about the K60365 model, including its definition, dimensions, package, weight, and volume.
Details about the K60365NE model, including its definition, dimensions, package, weight, and volume.
Details about the K60400NE model, including its definition, dimensions, package, weight, and volume.
Guidelines for safely moving and positioning the appliance before installation.
Requirements and best practices for installing the refrigerator in its location.
Instructions on how to adjust the appliance's legs for proper leveling.
Steps to remove and replace the hinge cover on the upper door.
Procedure for safely removing the refrigerator's upper door.
Method for detaching and reattaching the refrigerator door handles.
Guide on how to change the direction of the refrigerator door opening.
How to replace the internal light glass and LED module.
Steps to access and maintain the odor-reducing photocatalyst filter.
Procedure for removing and installing the fridge compartment fan motor.
Method for assembling and disassembling the crisper drawer covers.
Steps to remove and install the freezer evaporator cover.
Procedure for assembling and disassembling the freezer fan unit.
Method for removing the freezer compartment sensor.
Instructions for assembling and disassembling freezer drawers.
How to remove the protective cover for the control card.
Procedure for removing and reinstalling the main electronic control board.
Steps to remove the upper refrigerator door hinge.
Procedure for removing the lower door hinge and adjustable feet.
Method to remove the container near the compressor.
Steps to safely disassemble the run capacitor.
Procedure for removing the thermal relay group.
Lists specific part numbers and descriptions for various refrigerator models.
Details specifications and operation for the compressor and fan motors.
Explains the roles and characteristics of various sensors and heating elements.
Details the electronic control board, EK3 card, and display interface.
Explains the operation principles of FF and Freezer defrost cycles.
Details the operational conditions for fans, heaters, and the compressor.
Describes modes like Quick Freeze, Quick Cool, Eco-Extra, Vacation Mode, and Key Lock.
Procedure to enter and perform a service test on the refrigerator.
Steps to switch the appliance into dealer mode for configuration.
Identifies FRZ Air Sensor errors and associated display codes.
Identifies Defrost Sensor errors and associated display codes.
Identifies FF Air Sensor errors and associated display codes.
Identifies high temperature warnings and their display.
Addresses common issues like no operation or compressor problems.
Covers problems related to temperature, running time, and noise.
Deals with condensation, humidity, bad odors, and door sealing issues.
Exploded view of the polyurethane door components.
Exploded view of door accessories and their placement.
Exploded views of various internal and external refrigerator components.
Exploded views of external heating system parts.
