37
Installation
14.4 Complete the Conversion
• Section 18.13Section 18.12Section 18.11
Section 15.0Section 16.0Section
6.4
•
•
• all
Section 18.3
Section 13.1
•
• Section 6.6
•
• Section 6.5
• Section 6.5Section 6.3
14.3 Convert the Gas Valve
WARNING:
•
•
•
•
1.
2. See Figure 14.3.01
3.
Figure 14.3.02
Figure 14.3.02.
4.
Figure 14.3.03Figure 14.3.04
Figure 14.3.05
5.
IN THE EVENT THAT THE THREADS OF THE VALVE ARE STRIPPED
REPLACE THE VALVE.
6.
7.
8.
9.
WARNING: Installation should be carried out in a clean environment.
WARNING: This modulating conversion kit must ONLY be applied as part of a conversion kit supplied by the APPLIANCE
MANUFACTURER.
WARNING: Correct operation of the system cannot be guaranteed if the conversion kit or valve has been dropped or has
sustained a strong impact.
INSTALLER NOTICE: These instructions must be left with appliance.
Figure 14.3.01:
Figure 14.3.05:
Figure 14.3.03:
Figure 14.3.02:
Figure 14.3.04:
To Next Page
