4
ENGLISH
STARTING UP
Charging the Battery
Before using your ARCHOS for the first time, completely charge the battery:
Connect the supplied USB cable to the ARCHOS and to the supplied USB power adapter. Plug the USB power adapter into a wall
outlet (Flash Model).
IMPORTANT: Use only the included USB cable to charge your device. Do not expect your device to charge properly when con-
nected to your computer.
OR Connect the supplied power cable to the ARCHOS and to a wall outlet (HDD Model).
The ARCHOS device will turn on and start charging. The charging indicator light is on when the battery is charging.
It will blink when the battery is charged.
IMPORTANT: When the battery is completely empty and you plug in your device, the charging indicator light will turn on then start
to blink. The indicator light blinking rapidly means that the device is charging but does not yet have enough power to start. This
charging when off may take some time. Once the device has charged enough to start, it will switch on and display the ARCHOS
boot logo.
1
2
To Next Page
Loading...
Need help?
General
