Archos 5 - Transferring Playlists from Windows Media Player

Archives
transfer it directly to your ARCHOS if
you use Windows Media Player 10 or
higher.
Refer to Windows Media Player Help on
how to create a playlist.
Once your playlist has been created on
Windows Media Player, proceed as
follows:
1. Make sure you have the most recent
firmware running on your device (see
Updating the firmware in our full
manual).
2. Make sure your ARCHOS is in
"Windows Media Device" mode (default
mode).
To check this, go to Tools > Settings >
Storage. Next to "USB preference",
make sure "Windows Media Device" is
selected.
3. Connect your ARCHOS to your
computer and select "Enable USB".
You should see "Windows Media
Device" displayed in the Windows
Explorer screen.
Note: If your device automatically
switches to Hard Drive, this means that
your Windows Media Player doesn’t
recognize your ARCHOS as a Windows
Media Device as you don’t have the
required version (Windows Media Player
10 or higher).
4. Select the "Sync" tab, choose your
Playlist to synchronize and click on
"Start Sync".
When your synchronization is over,
disconnect your ARCHOS device.
5. To view and play your playlist, open
the Music browser (Play > Music) from
the home screen of your ARCHOS.
Browse the Music Librairy items using
the scroll-down bar, and then tap on
Playlist.
Page 13 / 34
(c) 2020 ARCHOS <noreply@archos.com> | 2020-05-07 07:51
URL: http://faq.archos.com//index.php?action=artikel&cat=138&id=99&artlang=en