Archives
Troubleshooting
The following message is displayed on my ARCHOS device: “Error code
203”.
This can happen if you are connected to
a Macintosh computer.
To fix this:
1. Download the following third party
software: “Clean UP Smb mess”.You can
find and download this application for
free on the Internet.
2. Once the software is installed,
connect your ARCHOS to your
computer. Drag and drop the ARCHOS
icon onto this application icon.
The application will fix the problem.
Once finished, disconnect your ARCHOS
device.
After connecting my ARCHOS to my computer, there are new files and
folders with gibberish that I never created.
It is possible that your device’s hard
drive structure (FAT) has been
corrupted.
This could have been due to a shutdown
(due to low battery power for example)
while writing to the ARCHOS from your
computer.
To fix this, use the 'Repair and
Formatting' tools feature of the device
(Tools > Settings > Customer
Assistance).
Select "Repair and Formatting", then
choose "Clear temporary system files
and cache".
I defined a code to access the demo display mode but I forgot it and
cannot exit the demo mode anymore. What should I do?
You cannot exit the demo mode without
the code you created.
Contact our Technical Support via the
help form on the website and give your
'Product key' (Tools > Settings >
Firmware and Plug-ins).
The demo mode included in the device
is designed to be used at retailers
Page 25 / 34
(c) 2020 ARCHOS <noreply@archos.com> | 2020-05-07 07:51
URL: http://faq.archos.com//index.php?action=artikel&cat=138&id=99&artlang=en
To Next Page
Loading...
