Specifications
Dimensions
Case: 245mm (H) x 140mm (W) x 335mm (D)
Primary Arm: Pivot Centres 550mm
Secondary Arm: Pivot Centres 570mm
Weight
Master Unit including battery 21kg
Slave 17kg
Remote Control Systems
Arco can supply hand held transmitters and receiver boards. There are three models of
hand transmitters available – single, two and four button. The multi-button units allow
individual operation of several devices (gates, doors etc.) from one hand transmitter.
Where a system is already installed, on say the garage door, conversion kits can be fitted to
allow operation of the door and gates from one multi-button transmitter.
Power Requirements
Standard ……………………………………….240 Volts 50Hz AC
LI-2B Installation Manual
To Next Page
Loading...