ARCO LI-2B - User Manual

23 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

ARCO Pty. Ltd.

LI-2B Intelligent Gate Controller

Installation/Owners Manual

Please do not commence installation until you have read this instruction book

.

LI-2B Installation Manual

Table of Contents

Questions and Answers

M
Mary RhodesJul 29, 2025
How to improve the radio transmitter range on my ARCO LI-2B?
- F
  Frank MillerJul 29, 2025
  To improve the range of your ARCO Controller's radio transmitter, first identify and remove any nearby sources of radio interference such as electric fences, baby monitors, or other transmitters. If range is still poor, verify that your controller settings are correct by referring to the 'Settings' section of this manual. For specialized needs, consider using special frequency transmitters and a matching radio receiver, available as specific order options.

Summary

Introduction

Product Overview and Capabilities

Details the LI-2B operator's features, situations of use, and control system flexibility.

Installation

Standard Installation

Describes gate opening inwards, hinge distance, and side room requirements.

Side Mount Installation

Mounting operator sideways for extra flexibility, gate swings outwards.

Restricted Side Room Installation

Adapting standard arms when side room is limited, often by modifying the secondary arm.

Out-Swing Installation

Gate swings outward away from operator, considering drive width and placement.

Settings and Configurations

Auto Close Function

Adjusting the automatic closing delay period for the gate operation.

Travel Time Adjustment

Setting the time the gate takes to reach fully open or closed positions.

Multi-User Functionality

Configuring the operator for multiple users, affecting gate closing behavior.

Overload Sensitivity

Adjusting sensitivity to prevent damage or injury from obstructions.

Anti-Clash Leaf Delay

Time delay between gates to prevent jamming during opening/closing.

Push-Button and Keypad Input

Connecting hard-wired input devices like push buttons and keypads.

Electric Lock Integration

Wiring connections for an electric lock/latch for gate security.

Photoelectric Safety Cell Installation

Installing a safety sensor to detect obstructions during closing.

Solar Power Wiring

Connecting a solar panel for power supply to the gate operator.

Troubleshooting and Fault Finding

Radio Transmitter Range Issues

Diagnosing and resolving poor range issues with radio transmitters.

Interference and Setting-Related Faults

Identifying interference sources and incorrect settings causing faults.

Product Specifications

Dimensions and Weight

Details on the physical size and weight of the gate operator components.

Remote Control Systems Information

Information on available hand transmitters and receiver boards.

Power Requirement Details

Specifies the standard voltage and frequency for operation.

Technical Assistance and Support

Direct Service Desk Communication

Submitting detailed enquiries and media to the service desk for quick assistance.

Local Support Options

Lodging enquiries locally or booking a service technician for installation support.

Product Return Procedure

Returning the product for evaluation if a fault is suspected rather than installation issues.

ARCO LI-2B Specifications

General

Brand	ARCO
Model	LI-2B
Category	Controller
Language	English